Iron Factory in ABOVE
Materials first: furnace ratios, drill tiers, placement order, and chest overflow discipline.
Iron automation in ABOVE is a factory problem, not a merchant dump. Drills and furnaces exist to feed materials for crafting and progression. They are not your primary money printer — fund them with crop income from Onion Auto Farm, berries, or other lines in the Money Making Methods page. This guide records community furnace-to-drill ratios, a sane place order, soft-cap awareness, and the same chest overflow rules that protect crop farms in Auto Farm Setup.
Mindset: materials, not primary cash
Sell onions and early wheat when you need coins. Build iron when you need ingots, machine parts, and the next tier of industrial gear. Mixing the goals creates ugly islands: half a drill field with no crop surplus, or a beautiful onion stack with no path into factories. Clear the money goal first using Getting Started habits, then allocate a factory zone with room for furnaces, drills, coal handling, conveyors, and overflow chests.
Tier 1 iron drills are expensive in recorded community notes — on the order of forty-five thousand coins each. That price alone explains why onion stacks and Landman planning matter before you spam drills.
Recorded furnace and drill ratios
Community factory videos describe furnace percentage setups tied to drill mixes. Two recorded ratio snapshots:
- About 7% furnace setup: five tier 1 iron drills plus one coal support arrangement in the matching tutorial pattern.
- About 18% furnace setup: two tier 2 iron drills plus three tier 1 iron drills plus one coal support arrangement in the matching tutorial pattern.
Read those as build recipes from community recordings, not as immutable law. After an industrial or arcane-tagged update, re-check live machine UI percentages before you delete a working line. The important idea is balance: furnaces, iron drills, and coal must be sized together so ore and fuel flow without starving one side of the loop.
When you upgrade from the 7% style layout toward the 18% style layout, you are usually introducing tier 2 drills and retuning furnace share. Do it in a test corner if coins are tight. A mis-ratio factory burns coal and time while producing uneven output.
Placement order that avoids pain
Popular iron guides emphasize order, not only counts:
- Place furnaces first so the smelting backbone exists before drills flood inputs.
- Place iron drills next, matching the ratio you chose for your furnace percent.
- Place coal last so fuel support lands against a factory that already has structure.
- Wire conveyors and chests with overflow in mind from day one.
Why this order? Dropping drills first encourages players to wander off while furnaces and fuel are still wrong. Furnaces-first keeps the smelting question visible. Coal-last prevents you from treating fuel as an afterthought that never gets connected.
Use Controls rotate and prompt keys carefully around dense factories. A single backwards conveyor in a drill alley is harder to spot than on a flat onion field.
Soft caps and scale limits
Community discussion records a possible soft cap around two hundred fifty drill placements. Whether that number is exact on your patch or not, the lesson stands: infinite drill spam is not a plan. Design compact ratios, prioritize tier upgrades when they beat raw count, and leave walking lanes for repairs. If you approach very large drill counts and start seeing odd placement or performance behavior, stop and redesign instead of forcing more machines into a laggy corner.
Soft caps can change in early beta. Cross-check Updates and re-validate with a small controlled placement test when something feels wrong.
Chest overflow and belt health
Iron lines fail the same way crop lines fail when storage fills. Recorded iron builds note that backed-up conveyors cause lag and reduced machine output. Attach large chests, empty them on a schedule, and plan overflow routes before you AFK in Ruins or while visiting islands.
Factory storage tips:
- Separate ore, ingot, and coal chests when possible so one full type does not freeze the entire belt spaghetti.
- Keep a clear sell or craft sink for finished goods.
- If output tanks, clear chests before rebuilding ratios.
- Avoid parking the only overflow chest behind a maze you cannot reach quickly.
Funding the factory
A single tier 1 iron drill at roughly forty-five thousand coins means five drills are a major purchase. Typical funding path:
- Stable watered crops and merchant sales.
- Onion stack or other high-output plant line.
- Optional berry filler for low-maintenance coins.
- Save for Landman expansion (ten thousand coins in recorded notes) if the factory needs footprint.
- Buy furnaces and drills in the ratio you can actually feed.
Do not strip your food income to place one vanity drill. The tier list and money guide help you decide whether the next ten thousand coins should buy land, another onion floor, or the first furnace block.
Factory zone layout habits
- Put furnaces where you can read their state without climbing through drills.
- Keep coal input obvious; fuel surprises cause silent stalls.
- Align drills in rows that match conveyor logic.
- Leave a maintenance corridor; future you will thank present you.
- Mirror the prove-one-module mindset from crop automation: one balanced furnace-drill-coal module, then clone.
How this page pairs with the video
The embedded Lumos Plays iron factory video is a visual companion for ratios and placement. Pause often. Count furnaces and drills in the recording against the 7% and 18% snapshots above. If the live game UI uses different percent labels after a patch, adapt the spirit of the ratio instead of forcing outdated counts.
Optional Scripts never replace correct ratios. If you experiment with helpers, still place furnaces first, drills second, coal last, and keep overflow chests empty enough to breathe.
Troubleshooting
- Drills running, no ingots: furnace count or fuel path.
- Furnaces idle: drill input missing or belts broken.
- Everything placed, island lagging: chest backup and excessive drill density near soft-cap behavior.
- Broke after shopping: return to onion or money loops before buying the next drill tier.
- No space: Landman expansion planning, then redesign compactly rather than scattering machines across thin sky paths.
Next steps after a working module
When one balanced module produces steadily and chests stay manageable, clone it, then decide whether tier 2 drills justify the upgrade path in the 18%-style snapshot. Keep crop printers online. Check Codes before big shopping trips. Revisit this page after industrial-tagged patches because factory math is exactly the kind of system early beta loves to retune.
Iron is materials infrastructure. Ratio it, order the placement, and never let overflow chests become afterthoughts.
Frequently Asked Questions
Quick answers about farms, passes, scripts, and early-beta ABOVE.
Is an iron farm the best way to make coins in ABOVE?
No. Iron lines are for materials. Fund them with crop income such as onions or berries, then use drills and furnaces for progression crafting.
What drill ratios do community guides use?
Recorded snapshots include a ~7% furnace setup with five T1 iron drills plus coal, and an ~18% setup with two T2 plus three T1 iron drills plus coal. Verify live after updates.
In what order should I place iron factory machines?
Place furnaces first, iron drills second, and coal last, then connect conveyors and overflow chests.
How much does a tier 1 iron drill cost?
Community recordings often cite about forty-five thousand coins for a T1 iron drill. Confirm the live shop price on your patch.
Is there a drill placement cap?
Players report a possible soft cap around two hundred fifty drills. Build compact ratios and watch for live limits instead of infinite spam.